10mm Castle

These 10mm castle elements are designed to work with multiples of 40mm x 20mm bases (although the ramparts are 25mm deep) and to be compatible with the Warmaster Siege rules. The castle was originally designed as a fantasy castle but may well be employed as an historical one. CAS-10mm-01 Castle Gateway Tower This gateway tower measures 96mm wide. One 40mm x 20mm base can stand on the ramparts, another in the tower, and another at the gates. Therefore, a full Warmaster infantry unit can man the gateway. The tower has murder holes and a working portcullis! The kit includes removable gates and damaged portcullis pieces. The model includes a pair of stairs going up to the tower’s battlements from the wall and another pair of stairs going down to a room inside the tower. £12 CAS-10mm-02 Castle Tower This kit contains enough pieces to assemble one tower. It can be built to make either a corner tower or a wall intersection. The tower has a 46mm square footprint. £7.50 CAS-10mm-07 Double Wall Section with a Stairway This kit makes one wall section that is 96mm wide and has a stairway from the castle courtyard up to the ramparts. £6.50 CAS-10mm-08 Lean-to Wooden Stable This kit makes a thatched, wooden stable that can lean up against an interior wall. It assembles on a base 48mm wide. The stable contains a feed box. The kit comes with thatch roofing material.   £1.50 CAS-10mm-09 Wall Section with an under-wall Sewer This kit makes a 48mm wide wall section with an under-wall sewer. It comes with a 2mm thick base. £4.00 There are more elements planned for the 10mm Castle. Follow Supreme Littleness on Face Book to keep up to date.
CAS-10mm-03 Pair of Castle Wall Sections This kit contains enough pieces to assemble two 48mm wide wall sections. The ramparts are 25mm deep. The engraved detail differs on all the pieces. £5.50 CAS-10mm-04 Pair of Double Castle Wall Sections This kit contains enough pieces to assemble two 96mm wide wall sections. The ramparts are 25mm deep. The engraved detail differs on all the pieces. £11 CAS-10mm-05 Sally Port Marker This sally port marker can fit against wall sections and towers and be used to mark where defenders can sally forth and annoy besiegers. The sally port is designed to look as if concealed by wall buttresses. £1.50 CAS-10mm-06 Wall Section with a Platform for Artillery The wall section is 48mm wide. The platform can accommodate 40mm x 40mm worth of bases – just right for two Warmaster artillery bases. £3.75 CAS-10mm-10 Ruined Wall Section This kit makes a 48mm wide ruined wall section. £4.00 10mm Castle Starter Set CAS-10mm-01 x 1 pack 1 Castle Gateway Tower CAS-10mm-02 x 4 packs 4 Castle Towers CAS-10mm-03 x 1 pack 1 Pair of Castle Wall Sections CAS-10mm-04 x 1 pack 1 Pair of Double Castle Wall Sections £55.00
Supreme Littleness Designs   FaceBook Page

Check out the Customers’ Gallery

Hall of Fame
All kits come unassembled and unpainted. The materials for the kits are fibreboards (MDF), card and paper.
Darrell Empey’s assembled and painted SLD 10mm Castle can be seen on his blog here.