10mm Trenches in 25s

These 10mm trench line models can also be used as 10mm embankments and earthworks.

10mm Trenches in 25mm Divisions

These 10mm-scale embankments are designed as models for marking trench lines in front of figure bases, especially for bases 25mm wide. One ‘division’ is a little over 25mm to be able to accommodate a 25mm-wide base.

BUNDLE 1 - Crenelated Trench Sections

T25-10mm-01 x 4 £2.40 Crenelated Trench Sections T25-10mm-01 Each crenelated trench section has three full divisions and ends of half-wide divisions. The model is 113mm long.

BUNDLE 2 - Forward Positions

T25-10mm-03 x 2 T25-10mm-12 x 2 £2.40 Observation Trench Section T25-10mm-03 The observation trench itself is a little over 10mm wide. The ends are half-wide divisions. Forward Position Trench Section T25-10mm-12 The forward position can accommodate a 25mm square/round base such as a machine gun or signallers base. The ends are half-wide divisions.

BUNDLE 3 - Straight Trench Sections

T25-10mm-10 x 2 T25-10mm-11 x 2 £2.20 Communication Trench Section T25-10mm-10 This straight communication trench model, like T25- 10mm-02, is a little over 84mm long - equal to three divisions. Long Straight Trench Section T25-10mm-11 This long straight trench model is 127mm long - equal to four and a half divisions.  

BUNDLE 4 - Corner Trench Sections

T25-10mm-06 x 4 T25-10mm-07 x 4 £2.40 Inward Corner Trench Section T25-10mm-06 This section can be used as a corner or as an end of a trench line. The model is half a division wide. Outward Corner Trench Section T25-10mm-07 This section can be used as a corner or as a junction of a trench. The model is one division wide.
Supreme Littleness Designs   FaceBook Page
The sections are designed to be finished off by having their embankments filled with a modelling compound or paste such as widely available spackle or grout filler. The kits are sold in bundles.

BUNDLE 5 - Trench Line Features

T25-10mm-02 x 2 T25-10mm-04 x 6 T25-10mm-05 x 4 T25-10mm-08 x 6 T25-10mm-09 x 4 £5.40 Plus FREE Trench Ladders! 50mm Position Trench Section T25-10mm-02 The position is a little over 50mm wide. The ends are half-wide divisions. The model, like T25-10mm-10, is a little over 84mm long. Inward Wedge Trench Section T25-10mm-04 This wedge section is designed to add bends to trench lines or simply give them a more natural look. Outward Wedge Trench Section T25-10mm-05 This wedge section is designed to add bends to trench lines or simply give them a more natural look. The model is one division wide. End Trench Section T25-10mm-08 As end sections these models have only one connecting end. Pack comes with one left and one right end section. The models are half a division wide. L-Shape End Trench Section T25-10mm-09 As end sections these models have only one connecting end. Pack comes with one left and one right end section. The models are half a division wide.
Crenelated Trench Section T25-10mm-01
All kits come unassembled and unpainted. The materials for the kits are fibreboards, card and paper.

Check out the Customers’ Gallery

Hall of Fame

25s

“Over the top, lads!”
The sections are designed to be finished off by having their embankments filled with a modelling compound or paste such as widely available spackle or grout filler.
The ‘connects’ – the end shapes where the sections connect – on each section are all the same shape. The outline of the shape follows the level of the ‘ground’ that should be sculpted with modelling paste. If the models are to be used as trenches, the ground level should not be lower than the walls of the trenches at the top of the walls.

Littleness Products

Bases & Sabot Bases 3mm-scale Models  
Shown with Pendraken 10mm figures on 3mm bases.
OUTSIDE UK ORDERS Please check the Order Page for details of post and packing charges before placing an order. Basket quotes UK postage only.
Although designed for 10mm miniatures, the models may also be suitable for 12mm and smaller 15mm figures.