10mm Trenches

These 10mm-scale trench line models can also be used as 10mm-scale embankments and earthworks. The ‘connects’ of both 20mm and 25mm systems are the same, making them compatible. The ‘divisions’, though are different: either (a little over) 20mm or 25mm.
Supreme Littleness Designs   FaceBook Page
BELOW The sections are designed to be finished off by having their embankments filled with a modelling compound or paste such as widely available spackle or grout filler.

Littleness Products

10mm North European 10mm Central European 10mm Castle 10mm Fantasy 10mm Bridges 10mm Trenches & Embankments
All kits come unassembled and unpainted. The materials for the kits are fibreboards, card and paper.

Check out the Customers’ Gallery

Hall of Fame
The ‘connects’ – the end shapes where the sections connect – on each section are all the same shape. The outline of the shape follows the level of the ‘ground’ that should be sculpted with modelling paste. If the models are to be used as trenches, the ground level should not be lower than the walls of the trenches at the top of the walls.

20s: 10mm Trenches in 20mm Divisions

These 10mm-scale embankments are designed as models for marking trench lines in front of figure bases, especially for bases 20mm wide. One ‘division’ is a little over 20mm to be able to accommodate a 20mm-wide base.

25s: 10mm Trenches in 25mm Divisions

These 10mm-scale embankments are designed as models for marking trench lines in front of figure bases, especially for bases 25mm wide. One ‘division’ is a little over 25mm to be able to accommodate a 25mm-wide base. 10mm Trench Ladders “Over the top, lads!” Small (chunky) ladders for 10mm trenches made from 2mm fibreboard. 6 ladders (3 variants) £0.50