These sabot bases are designed for Lion and Dragon Rampant for use with miniatures mounted by and large on plastic slotta bases. For ease of use, the slots are all slightly wider than the intended bases. 20mm-square base slot = 20.5mm square 25mm-square base slot = 25.5mm square 25mm-round base slot = 25.5mm in diameter Cavalry base slot = 24mm x 50mm 40mm-square base slot = 40.5mm square 40mm-round base slot = 40mm in diameter Chariot base slot = 48mm x 100mm A good selection of sabot base types are available here but more designs can be added on request. The sabots comprise a 3mm MDF topper (2mm can be supplied on request for the same price) complete with a card underlay (purposefully thin to keep the sabots from being too thick). Alternative MDF underlays can be supplied on request at extra cost. Units are typically of 12 figures, half units of 6. For sabots intended for less than the standard number of miniatures, slot-filling dice frames are available that can be used for holding dice to mark casualties. All sabot bases for less than 6 miniatures have a dice slot for a casualty marker. These can, of course, be filled in if not needed.

80mm x 60mm Sabot Bases

Close-Order Regular Sabot Base with 6 20mm-square Slots These sabots have slots that are regularly spaced, but with a couple of slots a millimetre or two off. Pack of 4 bases (4 variants) £2.40 Close-Order Irregular Sabot Base with 6 20mm-square Slots These sabots have slots that are mostly regularly spaced, but with a few slots irregularly spaced. Pack of 4 bases (4 variants) £2.40 Mixed Sabot Base with 3 Slots These sabots have slots for one 40mm-square base, two 20mm-square bases and one 7mm dice. Pack of 2 bases (2 variants) £1.20

80mm x 80mm Sabot Bases

Close-Order Regular Sabot Base with 6 20mm-square Slots These sabots may be useful for troops with levelled pikes or those that require space for additional miniatures/equipment to their rear. Pack of 4 bases (4 variants) £2.80 Open-Order Sabot Base with 6 20mm-square Slots These sabots have slots that are irregularly spaced. Pack of 4 bases (4 variants) £2.80 Triangle Formation Sabot Base with 6 20mm-square Slots These sabots have slots that are spaced in a triangle formation. They can help characterise units with brave individuals to their front, less-willing troops to the rear, or in a horde-like oval formation. Pack of 2 bases (2 variants) £1.40 Diagonal Facing Sabot Base with 6 20mm-square Slots These sabots have slots that are irregularly spaced. They face diagonally to allow diagonally-faced miniatures to face forwards. Pack of 2 bases (2 variants) £1.40 Mixed 80mm-round Sabot Base with a Single Slot This sabot base has a slot for one 20mm, 25mm or 40mm-square base by means of removable frames. Pack of 1 base £0.70 80mm-round Sabot Base with 3 20mm-square Slots A character base with three slots. Pack of 1 base £0.70

100mm x 100mm Sabot Bases

Close-Order Regular Sabot Base with 6 25mm-square Slots These sabots may be useful for troops with levelled pikes or those that require space for additional miniatures/equipment to their rear. Pack of 4 bases (4 variants) £3.40 Open-Order Sabot Base with 6 25mm-square Slots These sabots have slots that are irregularly spaced. Pack of 4 bases (4 variants) £3.40 Triangle Formation Sabot Base with 6 25mm-square Slots These sabots have slots that are spaced in a triangle formation. They can help characterise units with brave individuals to their front, less-willing troops to the rear, or in a horde-like oval formation. Pack of 2 bases (2 variants) £1.70 Open-Order Sabot Base with 6 25mm-round Slots These sabots have slots that are irregularly spaced. Pack of 4 bases (4 variants) £3.40 Triangle Formation Sabot Base with 6 25mm-square Slots These sabots have slots that are spaced in a triangle formation. They can help characterise units with brave individuals to their front, less-willing troops to the rear, or in a horde-like oval formation. Pack of 4 bases (4 variants) £3.40

Bases without Slots

These are the same 3mm MDF toppers complete with card underlays but without slots for bases but with a slot for a 7mm dice. 80mm x 60mm Rampant bases with a 7mm dice slot Pack of 4  £1.60 100mm x 80mm Rampant bases with a 7mm dice slot Pack of 4  £2.00 80mm-square Rampant bases with a 7mm dice slot Pack of 4  £2.20 100mm-square Rampant bases with a 7mm dice slot Pack of 4  £2.60 120mm-square Rampant base with a 7mm dice slot Pack of 1  £1.30 80mm-round Rampant base with a 7mm dice slot Pack of 2  £1.00 120mm x 100mm Rampant oval Monster base Pack of 1  £1.50

Precision-cut Bases

Straight-sided MDF bases can be a good alternative to bevelled plastic slotta bases. When ordering these be sure to state whether you want the bases cut to the same size as the slots in the sabot bases or slightly smaller. 20mm square bases (3mm thick) Pack of 30  £1.00 25mm square bases (3mm thick) Pack of 25  £1.00 40mm square bases (3mm thick) Pack of 16  £1.00 25mm round bases (3mm thick) Pack of 20  £1.00 40mm round bases (3mm thick) Pack of 12  £1.00 Cavalry Base (3mm thick) Pack of 18  £1.00 Chariot Base (3mm thick) Pack of 5  £1.00 BELOW Chariot sabot base painted by Derek Hodge.
Supreme Littleness Designs   FaceBook Page

Check out the Customers’ Gallery

Hall of Fame

Sabot Bases for Lion and Dragon Rampant Units

ABOVE Triangle Formation sabot bases for 20mm-square plastic slotta bases painted by Derek Hodge. BELOW Open-Order sabot bases for 20mm-square bases.

All the sabot base images on this page

are in scale with one another.

100mm x 80mm Sabot Bases

Close-Order Regular Sabot Base with 6 25mm-square Slots These sabots have slots that are regularly spaced, but with a couple of slots a millimetre or two off. Pack of 4 bases (4 variants) £3.00 Close-Order Irregular Sabot Base with 6 25mm-square Slots These sabots have slots that are mostly regularly spaced, but with a few slots irregularly spaced. Pack of 4 bases (4 variants) £3.00 Mixed Sabot Base with 5 Slots These sabots have slots for one cavalry base, four 25mm-square bases and one 7mm dice. Pack of 2 bases (2 variants) £1.50 Close-Order Regular Sabot Base with 6 25mm-round Slots These sabots have slots that are regularly spaced, but with a couple of slots a millimetre or two off. Pack of 4 bases (4 variants) £3.00 Close-Order Irregular Sabot Base with 6 25mm-round Slots These sabots have slots that are mostly regularly spaced, but with a few slots irregularly spaced. Pack of 4 bases (4 variants) £3.00 Regular Cavalry Sabot Base Centrally Positioned Pack of 4 bases (4 variants) £3.00 Regular Cavalry Sabot Base End Positioned These sabots may be useful for miniatures that would benefit from space for levelled lances or delicate tails. Pack of 4 bases (4 variants) £3.00 Irregular Cavalry Sabot Base Pack of 4 bases (4 variants) £3.00 Sabot Base with 2 40mm-square Slots Pack of 2 bases (2 variants) £1.50 Sabot Base with 2 40mm-round Slots Pack of 2 bases (2 variants) £1.50

100mm x 100mm Sabot Bases

Sabot Base with 3 40mm-round Slots Pack of 4 bases (4 variants) £3.40 Mixed 100mm-round Sabot Base with 6 Slots This sabot base has slots for one 40mm-square base and five 20mm-square bases. Pack of 1 base £0.85 Mixed 100mm-square Sabot Base with 6 Slots This sabot base has slots for one 40mm-square base and five 20mm-square bases. Pack of 1 base £0.85 Mixed 100mm-round Sabot Base with 6 Slots This sabot base has slots for five 20mm-square bases and one further slot for a 20mm-square base or a 25mm-square base by means of removable frame. Pack of 1 base £0.85 Mixed 100mm-square Sabot Base with 5 Slots These sabots have slots for one cavalry base, four 25mm-square bases and one 7mm dice. Pack of 1 base £0.85

120mm x 60mm Sabot Bases

Chariot Sabot Base for 1 Chariot Pack of 2 bases (2 variants) £1.70

120mm x 120mm Sabot Bases

Chariot Sabot Base for 2 Chariots Pack of 2 bases (2 variants) £3.00

Dice Frames

For units with less than the standard number of miniatures, these dice frames can be used to fill unused slots at the same time as holding dice to mark casualties. 20mm-square slot fillers with a 7mm dice slot Pack of 12  £0.50 25mm-square slot fillers with a 7mm dice slot Pack of 10  £0.50 20mm-round slot fillers with a 7mm dice slot Pack of 12  £0.50 25mm-round slot fillers with a 7mm dice slot Pack of 10  £0.50 7mm Dice Frames These 1mm frames are for 7mm dice. Pack of 20 frames £1.00 As standard, these are cut from 3mm MDF.
These sabot bases are cut from 3mm thick MDF to match plastic slotta bases but 2mm MDF can be supplied as an alternative on request.
Chariot sabot base beautifully painted by Derek Hodge.

Outside-UK Orders

Please go to the Order Page to check out the additional overseas postage charges.