Measuring tools can be requested for any game system. Blücher 1BW MeasureThis simple yet effective measuring tool can be used to make accurate measurements from the centre of a base and also acts as a firing arc template. Other base width sizes can be produced on request.Imperial Gap MeasureThis measuring tool has a hole at one end so that a string can be strung through it, making the measure easy to keep handy and accessible throughout game-play. Great for measuring gaps between miniatures! It measures 3 inches along the long side, and 2 inches,1 inch and half an inch on the other straight sides. Cut from 3mm MDFPair of measures£0.80
1BW Measure for 3” BasesThe base-width of this measuring tool is 3 inches.Pair of measures£1.001BW Measure for 3.5” BasesThe base-width of this measuring tool is 3.5 inches.Pair of measures£1.001BW Measure for 40mm BasesThe base-width of this measuring tool is 40mm.Pair of measures£0.601BW Measure for 60mm BasesThe base-width of this measuring tool is 60mm.Pair of measures£0.801BW Measure for 80mm BasesThe base-width of this measuring tool is 80mm.Pair of measures£1.00Supreme Littleness Designs’ game aids are not endorsed by the designers of any named game.
The measuring tools are cut from 2mm thick MDFunless listed otherwise.Bigger? Smaller? Metric? Imperial? Other sizes can be produced on request.